MaxiPro HPS 600w Lighting Kit

  • Sale
  • Regular price £140.00


  • Sunmaster 600W Dual Spectrum Lamp - The Sunmaster range of HPS Flowering lamps have fast become our most popular high pressure sodium flowering lamp. This is mainly due to they're higher than most lumen count, and very reasonable cost! As an example a general brand name 600watt HPS lamp has a lumen output of around 85-88,000 lumens, whereas the Sunmaster boasts a 90-92,000 lumen count, or when used in conjunction with a digital ballast; 95,000 lumen count! More lumens = more yield and a higher growth rate. The Sunmaster range of Dual spectrum lamps has a higher Red and Blue spectrum output than most brand name HPS lamps, ideal for those using one lamp for both vegetative and flowering. We recommend utilising a Sunmaster Metal Halide lamp for a dedicated lamp for the growth or vegetative phase of plant growth. * We recommend replacing your lamps every 6-9 months for optimum growing results.

 

  • Eurowing Reflector E40 - Euro grow light reflector suitable for 250-600 watt MH & HPS lamps, all reflectors are supplied with a 3 metre flying IEC connector. With hammered dimpled anodised aluminium to maximise reflectivity and reduce hot spots. E40 fitting fits nearly all horticultural lamps. (Length 47cm width 43cm height 13cm.) 

 

  • The Maxibright DigiLight Pro Select 600W  

    The new digital power pack with 6 power modes

 

600W Power Modes 250W 275W Super 400W 440W Super 600W 660W Super

 

 Developed with new Surge Control® software, when multiple DigiLight Pro® Select power packs are started from the same power supply they will safely ignite your lamps one at a time to reduce electrical surges.


Super power modes
Use the Super power modes to give each lamp 10% extra power for ultimate light control throughout your plant’s growth cycle.
Soft start technology


Gently starts the lamp with a low current for significantly improved lamp life and continually efficient output for maximum light.


Fast lamp re-strike
Plants need a regulated day and night cycle. To limit the damage caused by unexpected interruptions to your plant lighting such as a power cut, fast lamp re-strike safely re-starts hot lamps as quickly as possible rather than waiting for them to cool.


Dynamic frequency control
Domestic power supplies naturally fluctuate in voltage. Dynamic frequency control regulates the ballast output to your lamps for longer lamp life, efficient lamp output and no flickering.
 
Plus:
End of lamp life detection
Short circuit protection
Thermal protection and auto-reset
LED status light with diagnostic feature
Silent and lightweight
Run High Pressure Sodium & Metal Halide lamps

 


600W Power Modes 250W 275W Super 400W 440W Super 600W 660W Super