FloraMax Feed Charts

Use these FloraMax feed charts to choose the right feeding route, then click straight through to the products used at each stage.

Please treat this as a guide only and always adjust to suit plant response, irrigation frequency, water quality and environment.

FloraMax Veg-1 Feed Chart

Official guidance: add Pythoff PLUS first where used, stir well after each addition, and ensure final pH is between 5.0 and 6.3. Do not pre-mix products or add extra PK additives, chlorine or peroxide.
Veg-1 Schedule (ml/L unless stated)
Product Cuttings Veg Wk 1 Veg Wk 2 Veg Wk 3 Veg Wk 4 Veg Wk 5 Veg Wk 6 Veg Wk 7 Veg Wk 8+ Bloom Wk 1 Bloom Wk 2 Bloom Wk 3 Bloom Wk 4+
Veg-1 0.3 1.5 2.5 2.5 3 3 3 3 2.5 2.5 2.5 2 3
Root-XS 2 2 2 2 2 2 2 2 2 2 2 2 2
Flowering Enhancer - - - - - - - - - 1 1 1 1
OrganaBud - - - - - - - - - 2 2 2 2
Resin-XS
Optional
- - - - - - - - - - - 0.5 - 1 0.5 - 1
Silica 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2
System Maintenance 1 1 1 1 1 1 1 1 1 1 1 1 1
Growth-XS - 0.5 - 1 - - - - - - - - - - -
Pythoff PLUS
Optional
0.25 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5

FloraMax VegaFlora A&B Feed Chart

Official guidance: the FloraMax chart says liquids can be substituted with the powdered version and vice versa. For hard water, reduce VegaFlora A&B by 0.5ml/L. For high light or CO2 use, FloraMax advises adding extra VegaFlora A&B at 1ml/L.
VegaFlora A&B Schedule (ml/L unless stated)
Product Cuttings Veg Wk 1 Veg Wk 2 Veg Wk 3 Veg Wk 4 Veg Wk 5 Veg Wk 6 Veg Wk 7 Veg Wk 8+ Bloom Wk 1 Bloom Wk 2 Bloom Wk 3 Bloom Wk 4+
VegaFlora A 0.3 1.5 2.5 2.5 3 3 3 3 2.5 2.5 2.5 2 3
VegaFlora B 0.3 1.5 2.5 2.5 3 3 3 3 2.5 2.5 2.5 2 3
Root-XS 2 2 2 2 2 2 2 2 2 2 2 2 2
Flowering Enhancer - - - - - - - - - 1 1 1 1
OrganaBud - - - - - - - - - 2 2 2 2
Resin-XS
Optional
- - - - - - - - - - - 0.5 - 1 0.5 - 1
Silica 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2
System Maintenance 1 1 1 1 1 1 1 1 1 1 1 1 1
Growth-XS - 0.5 - 1 - - - - - - - - - - -
Pythoff PLUS
Optional
0.25 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5

FloraMax Feed Chart Guidelines

Key Notes
General instructions Fill reservoir with water, add Pythoff PLUS first where applicable, stir well after each addition, and keep final pH between 5.0 and 6.3.
Hard water Reduce Veg-1 by 1ml/L or VegaFlora A&B by 0.5ml/L, and lower pH to 5.0–5.5.
Soft water Ensure pH stays above 5.0. FloraMax recommends Silica at 0.1–0.3ml/L to raise pH if needed.
CO2 / high light Add extra Veg-1 at 2ml/L or extra VegaFlora A&B at 1ml/L. FloraMax also recommends matching CO2 to high PPFD at a 1:1 ratio.
Deficiencies Add 1–2ml/L FloraMax Ca-Mg-Fe and feed more often, aiming for 10–15% run-off.
Growth-XS Never use in bloom or the final week of veg. For shorter veg phases, apply in Veg Week 1. Use 0.5ml/L for sensitive plants.
Flushing Flush with plain water every 7–14 days. Include 0.5ml/L Pythoff PLUS and ensure pH is 5.0–6.0.
System care Use System Maintenance at 2ml/L to help prevent buildup. FloraMax also advises avoiding air stones and keeping reservoirs protected from light ingress.