The New BudBox™ Pro Range of Grow Tents
- Two new stronger, black powder-coated frames in 16mm & 25mm tempered rolled steel
- All new metal corner connectors
- New quick lock, push & click pole assembly
- New ventilation - 20% bigger ports all round to accommodate acoustic ducting
- The new BudBox™ features a green viewing window
- All new inspection doors - (from XL up)
- Ground level irrigation ports - (from XL up)
- Strong door clips & new branded, high quality zips
- Two new tent sizes - XL+ & XXL+
- The Titan range has no intrusive vertical or ground poles
The New BudBox™ Pro Range of Grow Tents - What's Changed
The all-new ground level irrigation ports
As well as increasing the size and number of all ventilation ports we have added ground level irrigation ports on the left and right hand side panels. This new port is the answer we have all been looking for when using floor based gravity feed systems and pump fed flood and drain pots. The positioning of the vent will permit the user to utilise either side of your BudBox™ to run pipe-work, both in and out of the tent, through a really neat double cuffed port, it’s a simple solution to the problem.
The whole BudBox™ Pro range is now equipped with steel, push & click fit connectors, which, in addition to the thicker tempered steel poles, provide greater load bearing strength for all your filters, fans and lighting requirements.
BudBox™ is still the ONLY grow tent that takes the time and care to powder coat our poles and connectors, delivering the best possible anti-corrosion protection and a very clean and reflective look. BudBox™ assembly instructions are in set out in a clear, concise, easy to follow format, , , all canvasses are zipped on 3 sides top & bottom, ensuring that erection remains simple & straightforward.
Over the past few years there have been many improvements in lighting technology and growing systems in various sizes and shapes. We have introduced 2 new sizes to help give you the exact lay out you want. The new sizes available are the 1.5x1.5x200(XL plus)) and the 1.5 x 3.0 (XXL plus)
(Click the table below to enlarge)
Let’s look at the cover
The inner skin of your BudBox™ grow tent is not just a simple piece of white or silver material, the nature of manufacturing such materials is highly skilled and, as such, there are only a small number of manufacturers in the world that can do it properly and to a consistent quality. Our philosophy on this subject is and will remain the cornerstone of our success and is not open to negotiation or compromise, WE USE THE BEST THERE IS ! All the component parts used in the construction of BudBox™ are sourced, tried & tested and are guaranteed safe for plants and people to use.
One of the most important factors when looking at the material is whether or not it is light proof. When shopping for your grow tent, ask the retailer/shop to test the light fastness, by simply holding a 600watt MH HID 35cm from the material, see if you can see any light passing through, try that with a BudBox™ and we guarantee YOU WON’T see any light, if light is coming out, light is getting in! and as the whole concept of the grow room was founded on controlling your growing environment’s light & dark period, which synthesizes the daily cycle of light & dark your plants need to develop. Plants develop their flowering hormones during the night/blackout period, which if compromised by the slightest bit of light, will be destroyed.
The BudBox™ Pro range continues to be based around the growing area principal of 1metre and 1.2metre and now an all new 1.5 metre squared area, but now has been upgraded! The Pro has a strong tempered 19mm diameter (upgraded from 16mm) pole in our 75 and 100 range, and a 25mm diameter tempered high tensile steel pole for all units ranging from from XL (1.2) up to the massive Titans, ensuring you have all the strength that you need in the big tents to hang heavy filters and lighting rigs. The smaller sizes reflect the lighter loads needed.
All new Ventilation
With the advent of more powerful lighting combinations, ventilation has become a real issue with some grow tents, as such, having studied every tent currently available very carefully, we have used this information to make sure that we have the right solution for you. BudBox™ Pro inlet & exhaust ports have been upgraded to enable the use of larger fans and, if required, the use of insulated ducting. The Titan range now has 340mm vents. Each vent and cable port is double-cuffed to prevent light spill both in and out. In addition to increasing the size of the air vents we have added 2 extra vents in the roof and the rear wall panel (in the Titan range) which gives you the option to vent from the front and/or rear, enabling you to position vent fans just where you want them!
Each BudBox™ has a new green viewing window so you can view your crop without disturbing it.
All new inspection doors
The new BudBox™ Pro has multiple inspection hatches, which have been positioned to the rear & side elevations of the Titan range, these doors have been included to enable the most convenient access to the full tent, at all times, without having to unzip the whole side, you can now reach right in to tidy up plants or move lights and inspect your crop like never before. The Titan1 and Titan+ models have 2 extra inspection hatches on the sides and the Titan2 and Titan3 have extra hatches on the sides and the back wall.
All new plastic clips to hold doors open
When open, the doors are held open with new clips instead of Velcro, which we feel was a more practical & neater solution.
As is always with BudBox™ all our tents unzip at the top and bottom, right around 3 sides, this gives you unparalleled access to the plants as well as making assembly easy. The BudBox™ Pro now comes with the addition of extra door flaps in the sides and rear of the Titans, so you now have every entry option you need covering.
The new easy-grip branded zip puller makes opening and closing the tent easy, even with wet fingers.
BudBox™ Pro comes in an all-new extra-strong carry bag.